Phone  717-545-4067          Fax 610-340-2354

www.Comfort-Calc.net
Heat pump installation information and checklist

Unit Installed By ________________________________________________     Date  _____/ _____/ _____ 
                                        Company Name

             For Service  Call     ___________________________________________________________

Heat Pump  Manufacturer                 _____________________________________

Model #                                             _____________________________________

Serial #                                              ______________________________________ 

Calculated Heat Loss and Heat Gain  _____________________________________BTU/h
  

See Manufacturers Installation Manual for Spec

Outdoor Ambient Temp                   ______________  Degrees

Refrigerant Type                              _____________________________________ 

High Side Pressure                           ______________  PSIG

Low Side Pressure                          ______________   PSIG

Superheat                                       ______________   Degrees

Subcooling                                     ______________    Degrees

Blower Speed  (Heat)                     ______________

Blower Speed  (Cool)                     ______________ 

Air Filter Size                                 _________________________________

Temperature Drop Across coil       __________________   Degrees (Cooling)

Temperature Rise Across coil       __________________   Degrees (Heat Pump Only)

Amount of KW Back-up                __________________    (If applicable)

Calculating CFM  - Check temps approx 24" from unit running in emergency heat setting.

Volts when Operating ________      Amps (Strip heat on) ________  Temp Rise __________

    Volts x amps x 3.414 / Temp rise x 1.08 = CFM  Should be 400 - 450 CFM per ton

 

Technician  ______________________________________________________________ 
  
                                                 Keep for your records of installation date and original set-up information
                                        

Heat Loss Info  Tech Menu  Q&A Forum  Contact Us